FEATURES AND BENEFITS

l Install in up to 75% less time compared to lead-oakum joints, hand-fitted flashings, mastics, or casing boots.

l Rated at 20 psig (40ft of head), which exceeds the performance requirements of most applications.

l Designed for use as a permanent seal. Seal elements are specially compounded to resist aging and attack from ozone, sunlight, water, and a wide range of chemicals.

l Standard fasteners have a two-part zinc dichromate and proprietary corrosion inhibiting coating. Corrosion resistant 316 stainless steel available for maximum corrosion protection.

l NSF 61 and Factory Mutual Fire Approved materials available. Also carry a wide variety of approvals from various Federal agencies, associations, code groups, laboratories, and organizations.

l Manufactured in an ISO 9001 certified facility.

l 16 sizes, color-coded EPDM, Nitrile, and Silicone elastomers may be used with various hardware options to match performance characteristics with service conditions.

APPLICATIONS

l Mechanical Contractors - Interior Piping Systems

l Manhole Pipe Entry Seals

l Waste Treatment Plants

l Cased Road Crossings

l Thermal Storage Systems

l Fire Protection Wall Penetrations

l Cased Railroad Crossings

l Electrical Isolation of Pipes

l Precast Concrete Vault Seals

l Insulated Pipe Seals

l Dual Containment Seals

l Marine Applications

l Noise Dampening

l Flexible Sign & Pole Supports

l Electrical Isolation of Pipe Supports

l Mining

l Pulp & Paper

l Decorative Fountains

l Pool Contractors

l Electrical Contractors

l Waste & Water Treatment

l Telecommunications

l Valve Pits

l Refrigeration Buildings

l Guard Post Assemblies

l Power Generation Dams

l Offshore Oil Rigs

l High Pressure Tank Guards

l Underground Steel Tanks

l Precast Concrete Manufacturers

l Perimeter Berm Installations Around Tank Farms

l Flow Restrictions in Sewer Maintenance

l p>

l Noise and Sway Dampener

l Through Deck Fire Breaks

l Bridge Construction

l Septic Tank Installations

l Coal Preparation Plants

l Tunneling Operations

SPECIFICATIONS

l Pressure resistant to 20psig (40 ft of head)

l Standard — EPDM – rubber (black)

l Oil Resistant — Nitrile rubber (green)

l Oil Resistant — Nitrile rubber (green)

l Low Durometer for fragile pipe — EPDM rubber (blue) Shore 40 ± 5

l Hardware Options - S316 Stainless Steel and Zinc Dichromate Coated Steel (1470hr salt spray tested) hardware

Model Sizing - Minimum Required Seating Width:

LS-200 / LS-275

LS-300 / LS-315

LS-325 / LS-340 / LS-360

LS-400 / LS-410 / LS-425 / LS-475

LS-500 / LS-525 / LS-575

LS-615 / LS-650

Please see the LINK-SEAL® Modular Seal Technical Data Sheet for more sizing and selection information