Specifications and Performance

Structure

• 1-1/4" diameter 304 stainless steel piping, combined with a 22.9 cm diameter stainless steel base, provides exceptional durability and performance.
• Quality Control
• Fully assembled before leaving the factory and subjected to comprehensive hydrostatic testing to ensure proper operation and leak-free performance.
• Valve
• 316 stainless steel ball valve ensures excellent corrosion and abrasion resistance. The eyewash valve is opened by gently pressing the stainless steel flag-style push plate, while the shower valve is activated by pulling the stainless steel triangular pull rod.
• Temperature Control
• Self-regulating heating cable is externally applied to the pipeline for heat trace and freeze protection. A 25mm thick insulation layer and green UV-resistant plastic casing further enhance freeze protection, maintaining operational integrity down to -34.4°C.
• Shower Head
• Fitted with a patented AXION® MSR ABS plastic shower head that offers uniform water flow distribution.
• Eyewash/Face Wash Head
• Equipped with a patented AXION® MSR ABS plastic eyewash/face wash head, designed with an "inside-out" flushing mechanism to remove contaminants from the eyes and nasal passages, helping to minimize secondary injury.

Inlet Size: 1-1/4" FNPT
Outlet Size: 1-1/4" FNPT
Shower Flow Rate: >75.7 L/min
Eyewash/Face Wash Flow Rate: >11.4 L/min
Water Pressure Requirement: 30-80 psi

Application
In environments where personnel may come into contact with hazardous or corrosive substances, it is necessary to provide suitable emergency eyewash/face wash and shower equipment. Emergency eyewash/facial and shower stations should be installed in accessible locations so that affected individuals can reach them within 10 seconds.
The 8520 Electric Heat Traced Emergency Shower and Eyewash/Face Wash Station is suitable for areas where temperatures may drop as low as -34.4°C and complies with ANSI Z358.1 standards for emergency eyewash and shower equipment.